61 found, showing page 3 of 5
$21.99
1.1OZ MEGALOC SEALANT
Multipurpose thread sealant for use on metals including steel, stainless steel, brass, copper, aluminum, and on plastics including PVC, CPVC, and ABS. Leak-free joints can be tested and put into service at once. Megaloc wipes clean from hands and tools with a dry rag, is odor-free, grit-free, and will not separate or settle. Megaloc does not harden, crack, or become brittle; joints can be disassembled without damage to pipe, fittings, or threads years after the joint was made. Megaloc is applied easily with a natural bristle brush even at temperatures as low as -25 deg (degrees) F, and performs over a temperature range of -50 deg F to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc is nonhazardous and nonflammable. It contains no lead, heavy metal, or volatile solvents.
View Details
$10.49
1OZ TFE PASTE
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F. For use on PVC, ABS, CPVC, polypropylene, iron, or steel threads. Apply to clean Male threads and assemble the joint. Not for use on oxygen systems.
View Details
$6.79
1OZ PIPE THRD SEALANT
Nontoxic. A special viscous paste designed for easy application. Recommended for leakproofing threaded, flanged, and all other assembly line connection work. Sets pliable; nondripping, nondeteriorating to PVC. Permits easy disassembly. Compares with higher priced top-quality thread compound.
View Details
$18.99
1/4PT PIPE THRD SEALANT
Nontoxic. A special viscous paste designed for easy application. Recommended for leakproofing threaded, flanged, and all other assembly line connection work. Sets pliable; nondripping, nondeteriorating to PVC. Permits easy disassembly. Compares with higher priced top-quality thread compound.
View Details
$29.99
2"X100' PIPE TAPE
High-quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection for steel pipe, fittings, and electrical conduit systems. UPC listed. 2 In. W. x 100 Ft. L.
View Details
$33.49
1/4PT PIPE THRD SEALANT
Rectorseal No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings. It is recommended for a wide range of applications including threaded PVC, polyethylene, galvanized steel, iron, copper, brass, aluminum, stainless steel, and fiberglass reinforced pipe. Temperature range of -50 deg. F. to +400 deg. F. Brushable to +20 deg. F. Brush top can.
View Details
$55.49
1/2PT PIPE THRD SEALANT
RectorSeal #5 is a non-hardening, slow-drying thread sealant made from special inert fillers dispersed in an oleoresinous base to facilitate its application to threaded pipe connections. Our pipe thread sealant is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings. Can be pressurized immediately. Rectorseal #5 pipe dope thread sealant lubricates and protects pipe threads. Lead free and contains no metal. Permits easy break out with no damage to threads. For pipe made of galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, reinforced fiberglass, and PVC. Not for use on ABS or CPVC.
View Details
$21.48
8OZ LEAK LOCATOR
Rectorseal Better Bubble detects leaks of refrigerant gases, air, oxygen, and most other gases. Its thick blue formula can be used at various temperatures and pressures with all types of pipe, tubing, valves, tanks, A/C and refrigeration coils, and similar applications. Will not corrode metal surfaces or attack plastic or rubber. Application and cleanup are safe and simple.
View Details
$15.99
1/2X260YEL PTFE GAS TAPE
Ideally suited for all threaded connections involving gas line installations for natural gas, propane, butane, and/or water, oil, and chemicals. Withstands up to 10,000 P.S.I. and temperatures of -450 deg. F. to +550 deg. F. Full 1.6 density. .0035 thickness plus .0005". Meets MIL T-27730A specification. 1 spool per header card bag.
View Details
$12.49
2OZ LEAK DETECTOR
Detect any gas leak in just a few seconds on all types of tubing, valves, cylinders, pressurized tanks, or any system under air, gas or oxygen pressure. May be used at temperatures between -50 deg. F. to +160 deg. F. Nontoxic, biodegradable, user friendly, noncorrosive, nonirritating to most skin. 2 oz. plastic spray bottle.
View Details
$2.49
1/2X260 PTFE TAPE
PTFE thread seal is manufactured from virgin PTFE. Thickness 3 mil., .4 density, material meets MIL-T27730A specification. Suitable for use on oxygen and potable water systems. Plastic spool and shell. Bulk packed.
View Details
$17.936
1.75OZ PIPE THRD SEALANT
RectorSeal T Plus 2 pipe thread sealant is a nonhardening (won't dry out in the can), nonstaining thread sealant containing PTFE plus synthetic fibers for use in potable hot or cold water systems. These fibers provide maximum sealing performance. It's low coefficient of friction allows tighter joint makeup with lower torque while lubricating and protecting threads. It also breaks out easily without galling, seizing, or damaging threads. It is excellent for service where immediate pressurization is necessary. RectorSeal T Plus 2 is nontoxic in accordance with NSF and Standard 61.PTFE enriched.Formulated for plastic and all metal pipes. For pressures up to 10,000 P.S.I. (liquids) and 2000 P.S.I. (gases).
View Details
$19.99
FAUCET SEAT WRENCH
Fits most faucet seat sizes. Made of hardened steel. Wolverine pro-quality plumbing hand tool. Carded.
View Details
$35.99
7" 21PS STRAP WRENCH
Heavy malleable iron body. Latex treated nylon high-tensile strength. Use on chrome parts, prevents marring. 2" IPS capacity. Length 7". Wolverine pro-quality plumbing hand tool. Bagged.
View Details
